Download Print this page

Tethon 3D Bison 1000 Manual

Hide thumbs Also See for Bison 1000:

Welcome to your new Bison 1000 3D Printer!

Open in Awe

Table of Contents

Need help?

Do you have a question about the Bison 1000 and is the answer not in the manual?

Page 1 Welcome to your new Bison 1000 3D Printer! Open in Awe ...
Page 2 ● Accessory box on top includes the power cable, adapter, USB Drive, Nitrile Gloves, Back Door Key, multiple scrapers. Set Aside ● Carefully lift out and place Bison 1000 on level surface. The feet of the printer can also be adjusted to make level.
Page 3 Flip switch to on position and press the power button on the front of the printer. _____________________________________________________________________________ Pro Tip: Never turn off printer via the switch on the back of your Bison 1000. If necessary, hold down the power button on the front for 10 seconds to shut down your machine. _____________________________________________________________________________ ...
Page 4 Wash resin off of skin with plenty of soap and water. ● Do not look directly into the projected UV light. ● When providing maintenance to the Bison 1000 always shut off and unplug from the power source. Never open up the printer ...
Page 5 Support Thank you for purchasing Tethon 3D’s Bison 1000 Printer! If you have any questions or need support call 402-281-4085 or email support@tethon3d.com For Material support see Resin Guidelines. ...