Mini Fuse (Blade Type), Cover - Sony DSX-GS80 Service Manual

DSX-GS80/M80
3-3.

MINI FUSE (BLADE TYPE), COVER

This unit locates the heat sink on the left side.
When touching this unit, be careful not to touch
the heat sink on the left side of the unit.
rear side
heat sink
left side
cover
Note 3: When installing the cover,
do not press on the center
of the cover.
4 boss
(See Fig. A)
5 boss
(See Fig. B)
Note 2: When installing the cover, check
that five bosses are all locked.
OK
Boss is locked. Boss is unlocked.
cover
chassis
OK
Boss is locked. Boss is unlocked.
cover
chassis
20
right side
2 Insert a flathead screwdriver
front side
3
4 boss
(See Fig. A)
5 two bosses
(See Fig. B)
NG
cover
chassis
NG
cover
chassis
cover
left side
front
chassis
side
between the cover and chassis,
raise the cover.
8 cover
(See Fig. A, B)
6 claw
Sony CONFIDENTIAL
For Authorized Servicer
1 mini fuse (blade type)
Note 1: When installing the mini
fuse (blade type), insert
straight into the interior.
cover
chassis
2 Insert a flathead screwdriver
between the cover and chassis,
raise the cover.
7
6 two claws
SYS SET