Van Beest Green Pin Tycan Lifting Chain User Manual

Green Pin Tycan
®
As strong as steel, a
fraction of the weight
safer
working
Material: Made with 100% Dyneema
webbing in a Mobius twist with stitching
on each side
Safety Factor: MBL equals 4 x WLL
Temperature Range: -40°C (-40°F) up to +70°C (158°F)
Certification:
MTC
link working width thickness
size load limit link link
a b
mm t mm mm
11x15 2.6 15 11
11x20 4 20 11
15x25 5 25 15
13x30 6.8 30 13
link working width thickness
size load limit link link
inch t inch inch
7 / x 19 / 2.6 19 / 7 /
16 32 32 16
/ x / 4 / /
7 25 25 7
16 32 32 16
/ x1 5 1 /
19 19
32 32
/ x1 / 6.8 1 / /
1 3 3 1
2 16 16 2
Lifting Chain
improved
efficiency
® ; layers of
DNV GL TQ DNV GL TA CE
b
length links elongation weight
inside per mtr at MBL per mtr
c
mm % kg
100 10 5 0.32
100 10 5 0.47
100 10 5 0.58
125 8 5 0.75
length links elongation weight
inside per mtr at MBL per mtr
inch % lbs
4 10 5 0.70
4 10 5 1.04
4 10 5 1.28
4 / 8 5 1.65
23
32
FCHLIFT
Green Pin Tycan
man-made fibre, Dyneema
performance and flexibility of steel chain but is a fraction of the
weight. It is very safe to use, non-corrosive and waterproof. In
fact, it even floats! The soft touch and light weight makes Green
Pin Tycan easy to use, allows quicker application and greatly
®
reduces the potential of damage to cargo, a critical factor when
handling objects with sensitive surfaces. By using Green Pin
Tycan companies achieve greater efficiency and a safer working
®
environment for their staff.
Quality assurance
• Every chain length is proof load tested to 2 times Working Load Limit
(WLL).
• Visual inspection is carried out on each chain link to detect
possible defects.
• A 5-link sample of every 1000 meters (0.62 miles) produced is
tested to destruction to confirm MBL.
• Green Pin Tycan
• Declaration of conformity to the Machinery Directive 2006/42/
EC with relevant CE marking.
Where and how can Green Pin Tycan
• Green Pin Tycan
that can be used within the limits as set forth in this user manual.
• Green Pin Tycan
environmental temperatures, but should not be exposed to
temperatures above +70°C (158°F).
• Green Pin Tycan
to the designated WLL, but never exceeded.
• Green Pin Tycan
when the relevant load reduction factor is taken into account.
Do not exceed the WLL.
• Green Pin Tycan
in a subsea environment.
• Green Pin Tycan
near-static conditions.
Verification before first use
Before first use of Green Pin Tycan
ensured 'that':
• Green Pin Tycan
specified in the order.
• The valid manufacturer certificate and CE declaration are available
for examination and/or verification.
• Ensure that manufacturer's label(s) are present and legible and that
the label(s) contain the same information as the manufacturer's
layers
certification.
• The users of the sling have received appropriate instruction and
training.
6
6
Verification before each use
8
• Check Green Pin Tycan
7
or missing ID tags prior to each use. Never use damaged
Green Pin Tycan
layers
• Connect Green Pin Tycan
components as mentioned further in this manual or to certified
6
components with a maximum surface roughness of 5 microns
and adhering to below values:
6
8
link
7
size
mm
11x15
11x20
15x25
13x30
® has been created from the world's strongest
® , and is a link chain that has all the
® has a DNV GL Type Approval.
® Lifting Chain be used
® Lifting Chain is a general purpose lifting chain
® Lifting Chain can be used in min/max
® Lifting Chain is able to lift loads safely only up
Lifting Chain is able to lift loads safely only
®
Lifting Chain can be used on land, at sea and
®
Lifting Chain should be used under static or
®
® Lifting Chain it should be
® Lifting Chain meets the exact requirements
Lifting Chain for any damage, defects
®
Lifting Chain.
®
Lifting Chain to recommended
®
lifting minimum minimum
capacity pin diameter clevis width
t mm mm
2.6 13 15.5
4 16 20.5
5 16 26
6.8 20 31
maximum
clevis width
mm
18
24
31
37
greenpin.com