Summary of Contents for Wasp SMART WIND SENSOR
- Page 1 S M ART WI ND S E NS O R USER M AN UAL Read the wind – lift your per formance WASP WS Final. Adjusted.indd 1 12/11/18 2:49 pm...
- Page 2 Congratulations on purchasing the WASP Smart Wind Sensor which offers a new dimension in performance measurement. The WASP smart wind sensor measures both wind speed AND direction along with ground speed, and climb rate. All this enables precise calculation of total exerted power of your cycling in real time.
- Page 3 WASP wind sensor components Wasp Smart Wind Sensor Handlebar mounting bracket USB micro charging cable (Garmin compatible) WASP WS Final. Adjusted.indd 3 12/11/18 2:49 pm...
- Page 4 How WASP wind sensor works Measure altitude Measure ground speed and direction POWER ATTENTION: Please fully charge WASP smart wind sensor Measure wind speed and direction before use. Plug accompanying USB charger cable into a USB port or USB charger adaptor.
- Page 5 Mounting WASP sensor Hold WASP sensor unit at Turn unit face forward, the unit Good to go! right angles above mounting automatically powers on and is bracket. Move unit down and ready to log your ride. lock into bracket head.
- Page 6 Power on WASP Start your ride WASP reset button Set up screens WASP WS Final. Adjusted.indd 6 12/11/18 2:49 pm...
- Page 7 Set up Bluetooth devices 1. Tap to start Bluetooth scan. 3a. Tap to set WASP wind velocity sensor. 3b. Tap to set heart rate sensor. c. Tap to set cadence sensor. 2. Tap Bluetooth device to highlight, then tap on appropriate device above.
- Page 8 Set up bike Set up rider Enter your details. Enter your weight. Set up bike This is important. parameters Enter your bike weight. This is important. WASP WS Final. Adjusted.indd 8 12/11/18 2:49 pm...
- Page 9 Just clip your WASP Set WASP parameters. Wind Sensor onto All settings are the mounting mandatory. bracket, and it will start. Please visit www. thewaspworks.com Tap to log your to learn more. ride session. WASP WS Final. Adjusted.indd 9 12/11/18 2:49 pm...
- Page 10 Start your ride Caring for your WASP The WASP smart wind sensor is a sophisticated sensing unit and as such needs to be treated with care. Blue tooth devices. WASP is not suitable for wet weather Green – connected riding as water may enter the sensing Red –...
-
Page 11: Technical Specifications
1 Pa Weight 75 g excluding mount 107 g including mount Size 120 x 55 x 60 mm 1. Tests carried out @ 20°C, 60%RH 101,325 Pa 2. GPS specifications 3. Sensor specifications WASP WS Final. Adjusted.indd 11 12/11/18 2:49 pm... - Page 12 We shall not bear any legal responsibility for any direct or indirect, Hayes Bioelectronics Limited accidental or special damages, losses and expenses arising from or Papamoa, New Zealand in connection with this manual or the contained product. www.thewaspworks.com WASP WS Final. Adjusted.indd 12 12/11/18 2:49 pm...