Removal Of Cabinet, Mechanism Unit, And Main Board; Removing The Cabinet Parts - Sony SVT-N72P Service Manual

1-2. Removal of Cabinet, Mechanism Unit, and Main Board

1-2-1. Removing the Cabinet Parts

1. Remove the cabinet and bottom cover by removing the four screws (1) and five
screws (2).
2. Remove the front panel by removing the locks of the clamps (A) using a
screwdriver, etc. and slightly rotating the bottom part in the direction of the
arrow.
m
. Electrical adjustments for the this model can be performed with only the cabinet
removed.
. When replacing the bottom cover, do not tighten the screws (2) too much. Excess
tightness may damage the screws taps on the chassis.
1
Clamps (A)
Front Panel
SVT-N72P (E)
1
2
2
2
2
Fig. 1-1-1
Cabinet
1
1
Main Unit
Bottom Cover
2
1-3