DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
info@dalcnet.com www.dalcnet.com
CONSTANT VOLTAGE VARIANTS
➢
Application: Dimmer
CODE
Input Voltage
DLM1248-1CV-DALI 12-48V DC
DLM1224-1CV-DALI 12-24V DC
DLM1248-1CV-DMX 12-48V DC
DLM1224-1CV-DMX 12-24V DC
The LED Dimmer is produced by default with:
- Analog Automatic Detection of local command set as N.O. Push Button
- Dimming minimum level at 1%
PROTECTIONS
➢
OTP Over temperature protection (*)
OVP Over voltage protection (**)
UVP Under voltage protection (**)
RVP Reverse polarity protection (**)
IFP
Input fuse protection (**)
SCP Short circuit protection
OCP Open circuit protection
CLP Current limit protection
(*) Thermal Protection on the output channel in case of high temperature. The thermal intervention is detected by transistor (> 150°C)
(**) Only control logic protection
DLM 1248 singolo canale BUS
Device Manual
FEATURES
• BUS+FADER+DIMMER+DRIVER
• DC input: DC 12-24-48 Vdc or 12-24Vdc
• BUS Command:
- DALI
- DMX512+RDM
• MULTI INPUT – Analogic Automatic Detection of the Local Command:
- Normally Open Push-Button
- 0-10V
- 1-10V
- Potentiometer 10KOhm
• PUSH MENU' – Possibility to set:
- Minimum value of dimming
- Fade In
- Fade Out
• Constant voltage variant to Common Anode applications
• Voltage outputs for R-L-C loads, DLM1248-1CV-DALI or DMX
• Voltage outputs for R loads, DLM1224-1CV-DALI or DMX
• Memory function
• Adjusting the brightness of White light or monochromatic color
• Adjusting the brightness up to completed off
• Soft start and soft stop
• Optimized output curve
• Typical efficiency > 95%
• 100% Functional test – 5 Years warranty
Output
Channels
1 x 6,5A
1
1 x 10A
1
1 x 6,5A
1
1 x 10A
1
DLM1248-1CV-DALI/DMX
DLM
Single Channel
BUS
EASY-BUS
BUS Command
Analogic Auto Detection
DALI
N° 1 N.O. Push Button
N° 1 analog signal 0-10V
N° 1 analog signal 1-10V
DALI
N° 1 potentiometer 10KOhm
DMX
N° 1 N.O. Push Button
N° 1 analog signal 0-10V
N° 1 analog signal 1-10V
DMX
N° 1 potentiometer 10KOhm
Made in Italy
Rev. 2018-07-23
FW 1.2
DLM1224-1CV-DALI/DMX
LED DRIVERS
pag. 1/11