Starting Pc Mode - Samsung SAMSUNG_SL420 User Manual

Setting up the application software
PDF documents of user manual are included in the Software
CD-ROM supplied with this camera. Search the PDF files with
Windows explorer. Before opening the PDF files, you must
install the Adobe Reader included in the Software CD-ROM.
Install Adobe Reader from the CD provided. If the Internet is
not enabled, install Adobe Reader by using the executable file
located in the CD.
To install the Adobe Reader 6.0.1 correctly, Internet Explorer
5.01 or later has to be installed. Visit "www.microsoft.com" and
upgrade the Internet Explorer.

Starting PC mode

If you connect the USB cable to a USB port on your PC and then
turn on the power, the camera will automatically switch to "computer
connection mode". In this mode, you can download stored images to
your PC through the USB cable.
Camera settings for connection
1. Turn on the camera.
2. Connect the camera and computer with the supplied USB
cable.
3. Once the camera is turned on, the camera automatically
recognizes the computer and is connected to it.
If automatic connection fails, set the [USB] menu to [Computer].
(p.56)
Important information about USB cable usage.
If the camera is connected to the PC through a USB hub:
connect the camera directly to the PC.
If the camera and other devices are connected to the PC at the
same time: remove other device.
Camera can not be detected using the front side USB port of
computer. In this case, use the back side USB port of computer.
091