BABY DELIGHT Beside Me BD06120 Care & Instruction Manual page 8

Bedside Sleeping Mode - Continued
3. Move the bedside sleeper close to the parent's bed and check the height of the
BEDSIDE SLEEPER compared with the mattress on the bed. The SIDE SUPPORT
of the sleeper should always be placed close to the parent's mattress and the
mattress should always be aligned with the height of the SIDE SUPPORT for
restraint of the sleeper.
WARNING:
IN THE BEDSIDE SLEEPER MODE THE TWO LEGS OF THE BEDSIDE SLEEPER
SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT.
4. In order to attach the bedside sleeper to the parent's bed in BEDSIDE SLEEPER
mode, use the attached pair of ANCHORS provided.
5. Slide the ANCHORS between the top mattress and the base across the
opposite side of the bed using a back and forth 'sawing' motion and at the same
time pulling downward until the STRAPS and ANCHOR PLATES are in the
desired position.
WARNING:
6. Tighten the LOOP by pulling the BELTS firmly. Adjust the ANCHOR STRAPS
separately until the BEDSIDE SLEEPER is firmly in contact with the
parent's mattress.
BEDSIDE SLEEPER
PLATES SECURELY
ATTACHED TO THE
8
NEVER USE THIS
PRODUCT IN
MODE WITHOUT
THE ANCHOR
ADULT BED
ENSURE THE ANCHORS ARE STRAIGHT.