Table of Contents
Advertisement
Quick Links
160L TUMBLING COMPOSTER
ITEM: 95128
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
For questions please call our Customer Support: (909) 628 0880 Mon-Fri 9am to 3pm PST
Advertisement
Table of Contents
Summary of Contents for Xtreme Power 95128
- Page 1 160L TUMBLING COMPOSTER ITEM: 95128 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury, property damage and may void warranty. Keep this manual for future reference. Products in this manual may vary in appearance, assembly, inclusions, specifications, description and packaging. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. -
Page 3: Parts List
PARTS LIST PARTS LIST... - Page 4 ASSEMBLY 1. Assemble parts with the first. Ensure that the arrows on all parts are aligned, then secure them using 4 screws and nuts. 2. Install the next panel to the drum end panels and also to the previously installed panel using screws and nuts.
- Page 5 ASSEMBLY 5. Install the remaining panels. If required, slide the hatches into position. When fully assembled, the drum is ready to be attached to the frame. 6. Slide the frame central tube (aa) through the drum. 7. Assemble frame tubes “bb”, “cc” and “dd” together as shown.
- Page 6 HOW TO USE YOUR COMPOSTER First, select the location to install your composter that is convenient to move materials to and from, usually close to a garden. Choose a flat surface with enough room to be able to accommodate rotation of the composter. Be sure the location has direct sunlight. The composter world best by mixing moist nitrogen rich greens with dry, carbon rich browns.
- Page 7 HOW TO USE YOUR COMPOSTER BATCH COMPOSTING Checking the process: After 2 or 3 days, check your mix to see if it is getting hot, the beneficial organisms are multiplying and doing the job decomposing materials. Turning the composter 5-10 times every 2 or 3 days will mix the materials and keep the process active.
-
Page 8: Maintenance
MAINTENANCE To remove the finished compost, turn the barrel of the composter so the door is facing the ground and slide the door away from the chamber you want to empty. Make sure part of the door is still covering the unfinished side, which may not be ready to be emptied. COMPOSTING TIPS: Three rules for composting: 1. - Page 9 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 95128 and is the answer not in the manual?
Questions and answers