Sportsman SSWTWC36 Assembly Instructions

Stainless steel work table w/casters, max weight capacity 220 lbs

Stainless Steel Work Table w/Casters

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT USE THIS PRODUCT!

DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.

If you experience a problem, have questions or need parts for this product, visit our website or call Customer

Service.

A copy of the sales receipt is required.

KEEP MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR REFERENCE

PARTS LIST

Table Top - 1 Piece

Set Screws - 16 Pieces

Max Weight Capacity = 220 Lbs

Under Shelf - 1 Piece

Hex Key - 1 Piece

Legs - 4 Pieces

3 Inch Castors - 4 Pieces

Check all packaging materials for

any small parts that may have come

loose during shipping.

Before assembly, locate and identify

all parts.

Table of Contents

Do you have a question about the SSWTWC36 and is the answer not in the manual?

Page 1 Stainless Steel Work Table w/Casters Assembly Instructions Max Weight Capacity = 220 Lbs READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur.
Page 2 ASSEMBLY INSTRUCTION WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE. WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN ASSEMBLING/MOVING TABLE. WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF. WARNING: MAKE SURE CASTERS ARE IN LOCKED POSITION BEFORE USE. Fig 2 Fig 1 Fig 3...