Table of Contents
Advertisement
C
O N N E C T I O N S
Connecting to a TV with DVI Jack
1
Using the HDMI-DVI cable (not included), connect the HDMI
OUT terminal on the rear of the DVD player to the DVI IN
terminal of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO
(red and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the DVI
signal from the DVD player appears on your TV screen.
Connecting to a TV with HDMI Jack
1
Using the HDMI-HDMI cable connect the HDMI OUT terminal
on the rear of the DVD player to the HDMI IN terminal of your
TV.
2
Press the input selector on your TV remote control until the
HDMI signal from the DVD player appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 480p, 720p, 1080i and 1080p are selected in order.
The first press of the HDMI SEL. button brings up the current resolution.
The second press changes the HDMI output resolution to the next setting.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player's output is set to HDMI/DVI automatically
about 10 seconds later.
- For better picture quality, set the HDMI output resolution to 720p or 1080i/1080p.
- If your TV cannot support the HDMI resolution you selected, the resolution is set to 480p automatically.
RED
RED
ENG-16
WHITE
Audio Cable
WHITE
HDMI-DVI cable
(Not Included)
HDMI cable
Advertisement
Table of Contents
