power King PK0101 Operation Manual
  1. Manuals
  2. Brands
  3. power King Manuals
  4. Saw
  5. PK0101
  6. Operation manual

power King PK0101 Operation Manual

Kohler 6hp 12” blade concrete saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KOHLER 6HP 12" BLADE CONCRETE SAW
OPERATION MANUAL
Register your product for warranty activation on www.qvtools.com as soon as possible.
CAUTION: To reduce the risk of injury, all operations and maintenance personnel must read and understand
these instructions before operating, changing accessories, or performing maintenance on our company
powering equipment. All possible situations cannot be covered in these instructions. Care must be exercised
by everyone using, maintaining or working near this equipment.
GREGG NEUER
PK0101
PK0101-O
PK0101
COVER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PK0101 and is the answer not in the manual?

Questions and answers

Summary of Contents for power King PK0101

  • Page 1 GREGG NEUER PK0101 PK0101-O KOHLER 6HP 12” BLADE CONCRETE SAW OPERATION MANUAL Register your product for warranty activation on www.qvtools.com as soon as possible. CAUTION: To reduce the risk of injury, all operations and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on our company powering equipment.
  • Page 2 Please take the time to familiarize yourself with the Power King PK0101 Concrete Saw by reading and reviewing all parts of this manual. If you should have questions concerning your Power King PK0101 Concrete Saw, please feel...

  • Page 3: Table Of Contents

    Cutting / p 12 Belts & Pulleys / p 12 Dry Cutting / p 12 III. LUBRICATION AND SERVICE / p 13 IV. SPECIFICATION / p 14 V. REPLACEMENT PARTS LIST / p 14 VI. WARRANTY / p 15 PK0101 PG 2...

  • Page 4: Rules For Safe Operation / P

    ALWAYS service air cleaner frequently to prevent carburetor malfunction. ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean dry location out of reach of children. Run engine out of gas prior to storage. PK0101 PG 3...
  • Page 5 Never operate the engine with heat shields removed. ALWAYS USE SAFETY GLASSES Safety glasses should always be worn when working around power tools. Everyday eyeglasses only have impact resistant lenses and may not prevent eye injury; they are NOT safety glasses. PK0101 PG 4...
  • Page 6 SHUTDOWN TOOL The saw should always be shut down before servicing or when changing parts such as blades, bits, cutters, etc. ONLY USE OEM POWER KING PARTS Using improper parts may increase the risk of personal or by-stander injury. NEVER STAND ON THE TOOL Serious injury could occur if a power tool is tipped, or if a cutting tool is unintentionally contacted.

  • Page 7: Cutting Blade Safety / P

    ALWAYS keep blade guards in place. DO NOT drop the cutting blade on ground or surface. the cutting blade to exceed the maximum safe allowable speed. DO NOT MODIFY THE ENGINE. PK0101 PG 6...

  • Page 8: Cutter Transportation Safety / P

    This information will be invaluable in case of an emergency. MAINTENANCE SAFETY NEVER lubricate components or attempt service on a running machine. ALWAYS allow the machine a proper amount of time to cool before servicing. PK0101 PG 7...

  • Page 9: Operation / P

    Tighten the blade shaft nut. blade tension. Make sure blade is running at proper Blade specification is too hard for the speed and that drive pin is functioning material being cut. properly. Use a softer bond/matrix to eliminate stress PK0101 PG 8...
  • Page 10 CORE PK0101 PG 9...
  • Page 11 DO NOT USE – REPLACE BLADE blade more than other. bushings. manual. www.qvtools.com. DO NOT RETURN TO STORE FOR WARRANTY CALL 1-800-344-3371 BETWEEN 8-5 PST OR VISIT WWW.QVTOOLS.COM PK0101 PG 10...

  • Page 12: Operating Principle / P

    7. Reconnect the spark plug and install the safety blade cover. TYPE OF CUTTING Cut speed depends entirely on using the correct blade for the material to be cut. Use Power King blades recommended for this model saw. BEFORE CUTTING 1.

  • Page 13: To Start Cutting / P

    NOTE: For deeper cuts several cuts should be made. Make incremental steps of 1-1/2 inch to 2 inches, until the desired depth is reached. The Power King PK0101 has a cutting depth of 4 inches. Push the saw slowly forward. Push enough forward pressure so that the engine begins to labor, but does not slow down. If the saw begins to stall, stop forward movement until full RPM is restored to the blade.

  • Page 14: Lubrication And Service / P

    III. LUBRICATION AND SERVICE Read Engine Manufacturer Manual for oil type. Engine Oil: General Grease: #1 LITHIUM PK0101 PG 13...

  • Page 15: Specification / P

    V. REPLACEMENT PARTS LIST AXEL - PK010101 BELTGUARD - PK010102 BELTSET - PK010103 BLADEGUARD - PK010104 CRANKHANDLE - PK010105 GUIDEBAR - PK010106 GUIDEWHEEL - PK010107 LIFTWHEELS - PK010108 RUBBERFLAP - PK010109 TANK - PK010110 BLADE DIAMOND BLADE STANDARD PK-010111 PK010112 PK0101 PG 14...

  • Page 16: Warranty / P

    Address: City: State: Zip Code: Telephone: Email Address: QV Tools Power King 2731 Crimson Canyon Dr. Las Vegas, NV 89128 DO NOT RETURN TO STORE FOR WARRANTY CALL 1-800-344-3371 BETWEEN 8-5 PST OR VISIT WWW.QVTOOLS.COM OR EMAIL US – SERVICE@QVTOOLS.COM...

This manual is also suitable for:

Pk0101-o

Table of Contents