Assembly; Assembling The Blow Pipe - Jonsered BB 2280 Operator's Manual

Assembling the blow pipe

• Connect the blower and control pipe with the flexible
hose. Clamp both ends of the flexible hose securely
with the hardware supplied with the unit.
6
2
1 Flexible hose
2 Control pipe
3 Clamp
4 Pipe, straight
5 Pipe, end
6 Handle
• When connecting the pipe with flexible hose, set "UP"
mark on the pipe facing upward.
• Align the protrusion- and the groove provided on the
tube ends and twist the tube until connection is
locked.
• Apply grease to the pipes if necessary.
NOTE!
Lubricate the pipes a little to facilitate assembly.
3
1
3
4
5

ASSEMBLY

• The position of the throttle control can be adjustable
back and forth by loosening "knob bolt" on the handle
by hand.
3
1 Throttle control
2 Pipe, straight
3 Knob bolt
Use the clamp to fasten the colgate tube containing the
throttle cable and the power cable to the hose.
1 Clamp
2 Cable
3 Flexible hose
1
2
2
1
3
–
English 13