Subscribe to Our Youtube Channel
Summary of Contents for Inercial Performance RSP CONIC
- Page 1 Installation and User Instructions RSP CONIC MADE IN SPAIN Inercial Performance S.L. www.einercial.com...
-
Page 2: Table Of Contents
Table of Contents Introduction........................3 Components........................3 Installation........................4-6 Adjusting The Handle Position...................7-8 Adding Weights to the Flywheel................8-9 How to move the rail.....................9 Different angles to pull the rope................10 Technical Specifications....................10 Accessories…..……...................... 11 Use.....…..…….......................11 Maintenance.......................11 Replacing the Rope....................12-13 Warranty…..……….......................13... -
Page 3: Introduction
INTRODUCTION The main characteristic of the Conical Pulley, due to the cone’s nature, is that the movement is accelerated with progressive weight. The rope’s radius decreases as it moves across the cone, progressively increasing resistance. The nature of the weight is inertial, that is, depending on how much power the user applies to the machine, power values will be higher or lower. -
Page 4: Installation
INSTALATION Parts of the machine. rail 120 cm outlet block handle screw chassis screw conical axis screw rail rail block masses screw flywheel... - Page 5 Place de Machine. 20 cm 0,72 cm 10 cm The surface where the machine is placed must be installed on a stable and level base. Place de machine as close as possible to the ground, if you have baseboards will be placed above it.
- Page 6 Set the machine to the wall output ground.* output ground.* 8 mm Ø 10 mm Ø * This ringbolt mounting (optional) is used to derive the output block to the ground. Make four holes in the wall to the height indicated, first insert the plugs and screw the four screws into the wall.
-
Page 7: Adjusting The Handle Position
ADJUSTING THE HANDLE POSITION... -
Page 8: Adding Weights To The Flywheel
ankle grip Unscrew to change grip FLYWHEEL MASS The mass of the flywheel defines a large range of speed/force curves that can be varied MASS (Flywheel weight) CHANGE INSTRUCTIONS Press the bottom up to remove the masses without mass... -
Page 9: How To Move The Rail
Press up and down Until it is in line with the flywheel The RSP conic flywheel comes with four masses to modify the force/speed parameters. The flywheel has four locations to add or delete steel weights in opposite pairs. Placement... -
Page 10: Different Angles To Pull The Rope
DIFFERENT ANGLES TO PULL THE ROPE Wall outlet block. Output pulley from the ground. Output of the cone. TECHNICAL SPECIFICATIONS Developed for the work of all the muscular groups. CAD-CAM Technology, numerical control manufactured machine. Made from aluminum. Rope without coefficient of elasticity. Exact control of cone-disk-axis moment of inertia. -
Page 11: Accessories
ACCESORIES Encoder RSP compatible with Smartcoach. Chronojump adapter. Traction bars of carbon fiber. Inox masses (increase 29 % the moment of inertia) Portability kit to attach the machine to goal structures, columns, gym bars… Spare parts: http://einercial.com/en/shop/ Rope always tense. Always work with the rope coiled in the axis to avoid to squash the bearings of the blocks. -
Page 12: Replacing The Rope
REPLACING THE ROPE through Delete the previous Rope Materials needed for change Put one end of the rope the wall outlet block. -
Page 13: Warranty
WARRANTY 1. Inercial Performance, S.L. warrants to the purchaser that RSP conic is free of defects in materials and workmanship under normal use and maintenance, has a limited warranty of 2 years from the date of purchase, subject to the terms and conditions that marks the Spanish law,... - Page 14 RSP CONIC is manufactured in Spain. www.einercial.com Inercial Performance S.L. Avd. Val Miñor, 46 1ºC 36350 Nigrán (Pontevedra) Telf + 34 659910685 Spain...
Need help?
Do you have a question about the RSP CONIC and is the answer not in the manual?
Questions and answers