Download Print this page

Sealey Auto Service TA111.V2 Instructions page 2

Test lead kit 92pc

Advertisement

fig.3
3.3.
ALLIGATOR CLIPS
Two clips are supplied, one red (positive) and one black (negative).
The banana sockets at the back of the terminals will accept the leads
supplied or the probe (fig.7). Quantity: 2.
fig.4
3.4.
1 to 2 CONNECTOR
Allows a one to two connection. Quantity: 2.
fig.5
3.5.
LED STROBOSCOPE
Two colour, two way LED. LED changes colour in response to the
polarity. Quantity: 2.
fig.6
3.6.
SRS CONNECTOR
Aids the setting up of a new SRS airbag and seat belt triggers after
an accident. Maximum current 0.25A, above this value the
connector will burn out. Quantity: 2.
4. PARTS
ITEM
PART NO:
DESCRIPTION
1
TA111.01
4.0mm ROUND TERMINAL (M) WIRE
2
TA111.02
3.5mm ROUND TERMINAL (M) WIRE
3
TA111.03
2.0mm ROUND TERMINAL (M) WIRE
4
TA111.04
1.5mm ROUND TERMINAL (M) WIRE
5
TA111.05
0.8mm FLAT TERMINAL (F) WIRE
6
TA111.06
1.2mm FLAT TERMINAL (F) WIRE
7
TA111.07
2.0mm FLAT TERMINAL (F) WIRE
8
TA111.08
2.5mm FLAT TERMINAL (F) WIRE
9
TA111.09
3.0mm FLAT TERMINAL (F) WIRE
10
TA111.10
5.0mm FLAT TERMINAL (F) WIRE
11
TA111.11
6.0mm FLAT TERMINAL (F) WIRE
12
TA111.12
6.0mm FLAT TERMINAL (M) WIRE
13
TA111.13
5.0mm FLAT TERMINAL (M) WIRE
14
TA111.14
3.0mm FLAT TERMINAL (M) WIRE
15
TA111.15
2.5mm FLAT TERMINAL (M) WIRE
16
TA111.16
2.0mm FLAT TERMINAL (M) WIRE
17
TA111.17
1.2mm FLAT TERMINAL (M) WIRE
18
TA111.18
0.8mm FLAT TERMINAL (M) WIRE
19
TA111.19
1.5mm FLAT TERMINAL (F) WIRE
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk, IP32 7AR
Original Language Version
3.7.
PROBE
The probe has a 4mm banana socket in the end of the barrel thus
allowing connectivity with other components in the system.
Quantity: 2.
fig.8
3.8.
MALE/FEMALE 1 to 1 CONNECTOR
Connectors are at either end of 100cm leads and allow a one to one
piggy-back connection. Quantity: 4.
fig.9
3.9.
5KW POTENTIOMETER
Use in conjunction with various sensors such as those for engine
coolant temperature, oil temperature etc. Quantity: 2.
fig.10
3.10.
BACK PROBE
Use these probe to pierce wire insulation to allow to test closer to an
open circuit, break or bad connection. Quantity: 4.
ITEM
PART NO:
DESCRIPTION
20
TA111.20
2.0mm FLAT TERMINAL (F) WIRE
21
TA111.21
3.5mm FLAT TERMINAL (F) WIRE
22
TA111.22
4.0mm FLAT TERMINAL (F) WIRE
23
TA111.23
ALLIGATOR CLIPS (RED)
24
TA111.24
ALLIGATOR CLIPS (BLACK)
25
TA111.25
LED STROBOSCOPE
26
TA111.26
1 TO 2 CONNECTOR
27
TA111.27
PROBE (RED)
28
TA111.28
PROBE (BLACK)
29
TA111.29
BACK PROBE (RED)
30
TA111.30
BACK PROBE (BLACK)
31
TA111.31
SRS CONNECTOR
32
TA111.32
5K POTENTIOMETER (VARIABLE RESISTOR)
33
TA111.33
1 TO 1 CONNECT WIRE (RED)
34
TA111.34
1 TO 1 CONNECT WIRE (BLACK)
35
TA111.35
CASE
36
TA111.V2.36
0.7mm FLAT TERMINAL (F) WIRE
37
TA111.V2.37
0.7mm FLAT TERMINAL (M) WIRE
01284 757500
01284 703534
fig.7
www.sealey.co.uk
Web
sales@sealey.co.uk
TA111.V2 ISSUE No:1 07/06/13

Advertisement

loading