Table of Contents
Advertisement
Quick Links
* Enclosure Not Included
1321 S. State College Blvd.
Fullerton, CA 92831 USA
Phone: 800-368-9700
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2013
9534-005-003-00
INSTALLATION INSTRUCTIONS
Motorized Flat Panel Lift System*
NORTH AMERICA
USA and Canada –
Fax: 800-832-4888
L180F
EUROPE
Unit 3, The Moorings Business Park
Channel Way, Longford,
Coventry, CV79JY, UK
Phone: +44 (0) 2476 644105
Fax: +44 (0) 2476 644165
Advertisement
Table of Contents
Summary of Contents for Premier Mounts L180F
- Page 1 Unit 3, The Moorings Business Park Fullerton, CA 92831 USA Channel Way, Longford, USA and Canada – Coventry, CV79JY, UK Phone: 800-368-9700 Phone: +44 (0) 2476 644105 Fax: 800-832-4888 Fax: +44 (0) 2476 644165 Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 ©Premier Mounts 2013 9534-005-003-00...
-
Page 2: Table Of Contents
L180F Table of Contents Preface Warning Statements Parts List Installation Tools Mounting Hole Layout Wiring Instructions Lift Operation Support Bracket Installation Lift Base Installation Base Installation Mount Installation Thread Depth Indicator Attaching the Mounting Brackets Attaching the Mounting Plate Securing the Display... -
Page 3: Preface
Customer Service department. Premier Mounts provides a warranty on all of our products. This warranty, however, is subject to correct use in accordance with the specifications and procedures as set forth in the manual. Maintenance and repairs must be done by a certified technician. -
Page 4: Parts List
This mount is shipped with the following installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Steel Floor Board (Qty 1) - Page 5 L180F (Qty 8) M4 x 16 (Qty 6) M8 x 20 (Qty 4) M4 x 25 (Qty 6) M8 x 25 (Qty 8) M5 x 12 (Qty 6) M5 x 16 (Qty 6) M8 x 30 (Qty 6) M5 x 20...
-
Page 6: Mounting Hole Layout
Power Cord Outlet Holes Display On/Off Control Box Mounting Points Control Box Mounting Points Wiring Instructions Prior to installing the base, the L180F must be wired. Step 1. Locate the lift control Step 2. Insert control cable into Step 3. Locate... -
Page 7: Lift Operation
L180F Lift Operation Console ON/OFF Box Functionality for Display Lift Applications Systems utilizing the console ON/OFF box will automatically turn on and off a display connected to the system. Power is delivered to the display when the lift is raised, and removed when the lift is lowered. The system is capable of running up to three lifts in parallel with impulse functionality and always active Anti-Collision™. -
Page 8: Support Bracket Installation
L180F Support Bracket Installation Lift Base Installation Wood Screw Lift The lift assembly comes pre-assembled. Mounting Point Column Support Bracket M8 x 35mm Screw Step 1. Slide the support bracket down the lift column about 3” from the top of the outer lift tube. -
Page 9: Base Installation
(i.e. furniture enclosure, plywood base, concrete fl oor, etc.). Unpack the L180F and familiarize yourself with the components. Please take time before you install the L180F to determine the location of where the L180F will be mounted. Please familiarize yourself with all components contained herein. -
Page 10: Mount Installation
L180F Mount Installation M6 x 20mm Phillips Flat Head Screws Mounting Screwdriver Spacer Lift M6 x 12mm Phillips Head Screw Display Mount Cabinet Slide Bracket Step 4. Attach the slide brackets to the display Step 1. Activate the remote and extend the lift mount using twelve (12 - six per side) until the lift is in the fully raised position. -
Page 11: Thread Depth Indicator
180F Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat panel. ® Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. ¯... -
Page 12: Attaching The Mounting Brackets
L180F Attaching the Mounting Brackets Phillips Head Screwdriver The Griplate™ have M4, M5 Dimple M6 and M8 hole patterns to fit the hardware that your flat panel requires. DIMPLES FACING UP DIMPLES FACING UP DIMPLES FACING DOWN DIMPLES FACING DOWN... -
Page 13: Attaching The Mounting Plate
L180F Attaching the Mounting Plate The mounting back plate comes with two vertical rows of mounting holes. These holes are all spaced evenly apart. Determine which holes will be best for your application. These holes will help determine the overall height of your display. -
Page 14: Securing The Display
L180F Securing the Display Once the brackets have been placed over the upper mounting rail on the mounting back plate, use a screwdriver to tighten the two bracket security screws. This will secure the display to the mounting back plate and will also prevent any lateral shift (see NOTE:) movement. - Page 15 L180F Floating Top Installation Step 2. Insert the lid into the top of the cabinet. Step 1. Close the lift using the manual remote. Step 3. Raise the lift while at the same time Step 4. Insert the #8 x 1/2” wood screws through...
-
Page 16: Troubleshooting Procedures
L180F Programming Lift Height (Optional) You can program the travel height of the lift using the optional remote. To do this, please refer to the following instructions. Step 1. Once lift is completely installed, lower the lift to its closed position and release the down ( ) button. -
Page 17: Technical Specifications
L180F Technical Specifications All measurements are in inches(mm). Installation Instructions Page 17... -
Page 18: Warranty
(3) years from the date of purchase. What Premier Mounts Will Do At the sole option of Premier Mounts, we will repair or replace, free of charge, any product or component covered by this Warranty if we determine that it is defective in materials or workmanship.
Need help?
Do you have a question about the L180F and is the answer not in the manual?
Questions and answers