Pronomic Laptop Stativ LS-110
Artikel: 00032122
Place one top side part (1) and one side leg (2) on top of each other. By choosing
the holes you can adjust total height of stand. Fix both parts with screws (3) and
distance poles (4). To adjust total width of stand you can use poles (5). Repeat this
steps for opposite top part and side leg. You can use the laptop stand with additional
ground plates (6) or clamps (7) to fix the stand on a table top.
Fix ground plates or clamp with screws and washers (8) at laptop legs.
You can attach self sticking rubber pads on ground plates or clamps to protect
Table surface and avoid scratches.