Advertisement
NOTE: If a firmware update is available for your sensor, the Wahoo Fitness app will now prompt
you to proceed with performing an update using the Wahoo Utility app. If you do not, the
update may be performed later. The free Wahoo Utility app is required to perform firmware
updates and is available from the Google Play Store.
How to connect to the Nike+ app (iOS only)
Wake up your TICKR by wearing it on your chest. The TICKR wakes up when a heartbeat is
present.
Make sure you are not in proximity to any other heart rate transmitters.
On your iOS device, navigate to Settings>Bluetooth.
Toggle Bluetooth to the "on" position.
Look for the TICKR under "Devices" and select it.
Wait for it to appear under "My Devices" with a "Connected" status beside it.
Return to your iOS device's home screen and select the "Health" icon.
Select "Sources".
Select "Nike+ Running".
Toggle "Heart Rate" (under "Allow Nike+ Running to read data") to the "on" position.
Want to connect another app?
This product is compatible with a number of third party apps. However, each app connects to
sensors a little differently. As a general rule: Open the compatible app you would like to use and
find the settings. Look for "connect to sensor" or another similar option. You must connect each
sensor separately for each app you use.
NOTE: Bluetooth devices can only pair to one app at a time. Make sure to close any background
apps that may be using the sensor before connecting to a new app.
Advertisement
