Table of Contents
Advertisement
Note: Press and hold
2. Enter a word or short phrase to appear in your phone's
display while in standby mode (Up to 13 characters).
3. Press the
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the
Display) and
menus appear in the display:
LCD—Sets the amount of time the backlight for the LCD
remains on after a period of inactivity. Optional settings are 5,
10, and 15 seconds as well as Folder Open.
Keypad—Sets the amount of time the backlight for the
keypad remains on after a period inactivity. Optional settings
are 5, 10, and 15 seconds as well as Folder Open.
Power save—Unless the backlight setting for the LCD has
been changed, the backlight dims after a minute of inactivity,
and then turns off. With Power save enabled, the backlight for
the LCD is always dim. After 1 minute of inactivity, Power save
turns the backlight off.
2. Use the navigation keys to highlight a sub-menu.
3. Press the
menu and change settings as desired.
94
to erase an existing banner, if necessary.
key to save the new banner.
key, then press
for Backlight. The following sub-
key to enter the highlighted option's sub-
(for
Advertisement
Table of Contents
