Entering Text in Alpha (Abc) Mode
Enter characters while in Alpha (Abc) mode by pressing
1.
the key with the desired characters (such as, pressing
once for "G").
ghi
Press the key repeatedly until the desired character
2.
appears in the display (such as, pressing
for "H").
Pause briefly and the displayed character is accepted and
3.
inserted into your message.
Press
to enter a space.
4.
Entering Text in T9 Word Mode
T9 Word recognizes commonly used words for a sequence of
key presses and inserts the word into your message. Using T9
mode is much faster than the more traditional method Alpha
mode, since T9 requires only one key press per letter of the word
that you are spelling.
Note: See "Changing the Text Entry Mode" on page 30 for instructions on
changing text entry modes.
While in T9 Word mode, press each key that corresponds
1.
to a desired letter, in sequence, one time.
31
Example: If you press the key sequence
2.
two times
ghi
3.
Example: When you press the key sequence
4.
likely to appear in the text entry field.
When you have completed pressing all the keys for the
desired word, review the word appearing in the text entry
field.
If the word in the text entry field is not the one you meant
to enter, repeatedly press
appears.
appears on the screen. Suppose the word you want is "Cod". Just
repeatedly press the
key until "Cod" is highlighted in the
display.
Press the
key to accept the highlighted word.
For practice, enter the word 'Samsung' into your message
by pressing each of the following keys only once:
mno
abc
pqrs
S
a
m
T9 Word recognizes that the most commonly used word
for the sequence of keys you just pressed is "Samsung."
, the word "Bad" is
abc
abc
def
until the word you want
, the word "And"
mno
abc
def
mno
ghi
pqrs
tuv
s
u
n
g