Finding A Contacts Entry - Samsung SCHA645 User Manual

Finding a Contacts Entry

Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your
Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press the Voice Recognition key (
to launch VoiceSignal.
"Say a Command" appears in the display and is
pronounced through the speaker.
2. Say "Contacts".
VoiceSignal prompts you to "Say the name."
3. Speak clearly and say the full name of the person you
want to call, exactly as it is entered in your contact list.
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with "Did you say?" followed by the
first name on the list.
4. Say "Yes" to confirm the name or "No" to hear the next
name, or use the keypad to select the correct name from
the list. (See "Choice Lists Settings" on page 149, for
more information.)
To say the name again, press the Repeat (right) soft ( ) key.
80
)