Download Print this page

Sealey TST10 Quick Manual page 2

Temporary puncture repair kit

Advertisement

Store locked up. Dispose of contents/container in accordance with local regulation
9
2. INTRODUCTION
Ideal for repairing punctures on tubeless tyres fitted to agricultural and off road vehicles. Can also be used as a temporary/emergency fix on cars
and commercial vehicles. Allows tyre to be repaired without removing the tyre from the wheel.
Not to be used as a permanent repair for road vehicles.
3. SPECIFICATION
Model no: .................................................................... TST10
Contents:... rasp, insertion needle, repair strips x30, glue 20g
4. OPERATION
4.1.
Remove object (causing puncture) from tyre if required.
4.2.
Fit collar onto insertion needle by using hex key to undo grub screw, (see fig.1).
4.3.
Clean/widen puncture hole with rasp.
4.4.
Fit strip in the middle of the insertion needle, with 50% protruding from each end.
4.5.
Cover the strip with glue.
4.6.
Push the strip most of the way through the tyre with the insertion needle, leave 20mm of the strip sticking out.
4.7.
As you pull the insertion needle back out, use your other hand to push down the collar, so that the tool nips on the strip and the strip is
pulled back out of the tyre.
4.8.
There will now be a loop and 2 ends protruding from tyre, that need to be cut off.
4.9.
Clean items in the kit and remove protector from insertion needle. Store kit in a safe, childproof location.
Fig.1
4.10.
4.11.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
TST10 | Issue:4 (1) 05/05/20

Advertisement

loading