Location Setting
This function identifies your location to the network via
the Global Positioning System (GPS). You can set this
function for continuous operation or to operate only in
the event that you dial 911.
Note: Contact your Wireless Provider to determine whether, when, or
where location-based services are available.
1. In standby mode, press the Menu (left) soft key (
then press
The following options appear in the display:
Location On—GPS location setting is on wherever the feature
is available.
911 Only—GPS location setting is on only when you dial 911.
2. Use the navigation keys to highlight the option you want.
3. Press the
You're returned to the Setup menu.
Network Selection
The Network setting lets you select NAM settings, and
Roam Options.
1. In standby mode, press the Menu (left) soft key (
then press
following sub-menus appear in the display:
Set NAM
the NAM option to NAM 2 to use both lines. Set the NAM option
to NAM 1 otherwise.
142
(for Set Up) and
key to select the desired Location setting.
(for Set Up) and
—If your service contract has two phone lines, set
),
for Location.
),
for Network. The