Cygnett CY2889CHCGL B22 User Manual page 4

5. Log-in the Cygnett Smart app with your email and password.
6. With the smart bulb inserted, turn off and on the appliance slowly (2 seconds interval) 5 times to activate
pairing mode – smart bulb will cycle between different colours when in pairing mode.
7. In the Cygnett Smart Home screen, select the
Please enter the password for your Wi-Fi network. If you see a message saying, 'Wi-Fi SSID restriction',
8.
simply tap the Next button and then press Allow to give Cygnett Smart permission to access your location.
After this, the name of your Wi-Fi network will auto-fill into the app and you can proceed to enter your Wi-
Fi password and select Next.
9. Please wait while Cygnett Smart finds your smart device. This can take a few minutes so please be patient.
10. After your device is found, give it a name and tap Complete. Your smart device is now ready to be used.
Please follow Steps 1 to 10 before pairing with Apple's Home app.
11. If you have an Apple device and want to set it up with the Home app and Siri, please see the following
steps:
i. Open the Home app on your iOS device.
ii. Tap Add Accessory (+)
iii. Using the camera, align it in view with the QR code attached in the quick start manual, or on the
smart device.
iv. Follow the in-app instructions.
v. Once complete, you can control your smart device through the Home app, or via voice
commands to Siri.
Cygnett Smart Home devices only support 2.4GHz Wi-Fi networks. For further information on how to install your
smart device, visit us at Cygnett Care – support.cygnett.com
A19 Colour + Ambient White
icon, and select Quick Pairing.
Smart Wi-Fi LED Bulb
User Manual
4 | P a g e