Halo BOLT Operating Instructions Manual page 7

NOTE:
The HALO BOLT FLASHLIGHT is designed to charge between
32°F-113°F (0-45°C). The battery indicators will rapid ash if the HALO
BOLT FLASHLIGHT is attempted to be charged outside of this
temperature range.
When you're on the road, you can also use the supplied Car
Charging Adapter to charge your HALO BOLT FLASHLIGHT.
USING YOUR HALO BOLT FLASHLIGHT / WORKLIGHT
The HALO BOLT FLASHLIGHT contains a ashlight and work-light. The
LED ashlight has a low and high beam mode. Press the ashlight
power ON/OFF button once to turn on low beam mode. Press the
button a second time to turn on high beam mode.
NOTE:
Magnets are built into the face of the ashlight.
The Work Light / Emergency Light can be turned on/o by pressing the
Work Light / Emergency Light Power ON/OFF button. The rst press will
turn on the work light. Second press will turn on the red emergency
light. Third press will turn on SOS ashing red light.
NOTE:
• The ashlight and work light will automatically turn o after 2
hours of inactivity.
• Do not look directly into the LED lights
• The ashlight head includes built-in magnets. To prevent drops,
ensure that ashlight is a xed to a at and smooth metal surface.
Built-in Magnets