Table of Contents
Advertisement
want to add to your personal address book. Your address book can
store up to 10 Voice Recordings at once.
How It Works
Once you've signed up for Sprint PCS Voice Command and created
1.
your address book, all you do is press
followed by the prompt "Ready."
After the "Ready" prompt, simply say, in a natural voice, the name of
2.
the person or the number you'd like to call. For example, you can
say, "Call Jane at work," "Call John on his wireless phone," "Call
555-1234" or "Look up Bob."
The number will automatically be dialed. Keep in mind that
3.
Sprint PCS Voice Command recognizes not only your voice, but any
voice, so others can experience the same convenience if they use your
phone.
For more helpful hints on Sprint PCS Voice Command, visit
www.talk.sprintpcs.com.
Dialing Options
Dialing options are displayed when you enter numbers using the keypad.
To select an option press
corresponds with the desired choice.
is used to dial the phone number. (If you are roaming and
(1) Talk
have the Call Guard feature activated, you must then press
"To Place Roaming Calls With Call Guard On:" on page 26.)
to save the phone number in your Internal Phone Book.
(2) Save
(See "Finding Internal Phone Book Entries" on page 62.)
is used to locate and display Internal Phone Book entries
(3) Find
that contain the numbers entered. (See "Finding Internal Phone
Book Entries" on page 62.)
(4) Hard Pause
Saving Phone Numbers With Pauses" on page 37.)
(5) 2-Sec Pause
Saving Phone Numbers With Pauses" on page 37.)
and the number on the keypad that
is used to insert a hard pause. (See "Dialing and
to insert a 2-second pause. (See "Dialing and
Making and Answering Calls
. You'll hear a tone
. See
Section 4
33
Advertisement
Table of Contents
