Initial Set-Up - Axonics SNM System 1401 User Manual

To set up your Charging System, you need to
charge your Charger on the Dock.
Plug the power supply into a wall outlet
■
and then into your Dock.
Place the Charger on the Dock. The
■
power light on the Charger will flash
green to indicate that the Charger is
charging. It can take up to 6 hours to fully
charge the Charger. The power light will
be solid green when the Charger is fully
charged.
Leaving your Charger on the Dock
■
continuously will not harm the Charger.

Initial Set-up

17