Advertisement
Carefully read all instructions
before use and save for future
reference.
The diagram (Fig. 1) will help you
locate and identify various features
and functions used in the User Guide
of your Ozark Trail 300L Recharge-
able Headlamp.
CHARGING THE BATTERY
Your Ozark Trail 300L
Rechargeable Headlamp
NOTE: The USB cable is for charging only/power only.
1. Open the Micro USB charging port (Fig. 2)
2. Plug Micro USB into input port then plug other end of cord into any USB outlet on computer, wall adaptor (not included),
etc. (Fig. 3, 5 & 6)
NOTE: Charging while using a USB wall adaptor will be faster than a computer USB port
3. When properly charged, the indicator light on the top of the headlamp will glow green. (Fig. 4)
NOTE: Recharge the battery immediately when light output is low. Red indicator light will turn on when battery is low.
4. When battery charging is complete, remove the Micro USB from the charging port and close the USB cover (Fig. 2).
USB Charging Port
FIG. 2
Push Button for Spot Light
High – Low – Off
Spot Light
Red Lights
contains a rechargeable lithium-polymer battery.
Micro USB
FIG. 3
Computer
USB Outlet
FIG. 5
(continued on back panel)
Battery
Indicator
Light
FIG. 1
USB Wall Adaptor
(not included)
FIG. 6
Push Button for Area Light
High – Low – Off
Push & hold Button
for Red Light
On – Off
Area Lights
Indicator Light
FIG. 4
Advertisement
