Advertisement
Advertisement
Table of Contents
Summary of Contents for Spamel SC/1B
- Page 1 Carbon monoxide alarm SC\1B Manuall TECHNICAL SUPPORT - tel. +48 71 31 59 068...
- Page 2 Thank you for purchasing our products. Please read the instruction manual and maintenance guide before use. The producer is not responsible for damage resulting from in- correct installation or operation of the device. Carbon monoxide alarm SC\1B constantly monitors the presence of car- bon monoxide (CO) in the air.
- Page 3 INSTALLATION SC\1B sensor is intended for use in the rooms where the potential risk resulting from the dangerous concentration of carbon monoxide is the highest. The device is ideal for kitchens, bathrooms, boiler rooms, ga- rages etc. When installing the sensor make sure it will be heard from other rooms in the building as well.
- Page 4 1. At least once per month run the device test using "Test / Hush" button. 2. Remove the dust from the device cover. 3. When the battery is almost empty it will be indicated with a single audible sound and the red "Alarm" LED which will blink at approx. 40 sec.
- Page 5 PRACTICAL INFORMATION Carbon monoxide is a very difficult gas for detection by a human be- cause it is colourless and odourless. It is poorly water-soluble, and its density is lower than the air. Together with carbon dioxide, it is a product of burning the fuels, which makes the combined density of the combu- stion gases higher than the air, so they accumulate in the lower parts of the rooms.
Need help?
Do you have a question about the SC/1B and is the answer not in the manual?
Questions and answers