Do not let the soldering iron directly contact the package section of the product. Direct contact with the
soldering iron may cause mechanical or optical damage.
Storage
Avoid exposure to direct sunlight, harmful gases, or dust, or storage in a place with sudden temperature
changes.
Do not lay a heavy object or load on the product or the bag. Also avoid stacking the products or bags when
storing them.
When storing the product for a long period of time, seal it in a moisture-proof package containing silica gel or
keep it in a low-humidity desiccator.
4. Input optical fibers (option)
When connecting the input optical fiber, clean the ferrule on the optical fiber as needed.
Do not bend the HAMAMATSU input optical fibers to a radius smaller than that shown in Table 2. Doing so
may break the optical fiber.
[Table 2] Minimum bend radius of input optical fiber
Product name
Fiber for UV/visible range
(resistance to UV)
Fiber for visible/near infrared range
Core diameter
Type no.
A15362-01
A15362-02
A15362-05
A15363-01
A15363-02
A15363-05
Minimum bend radius
(m)
600
800
400
600
800
400
(mm)
75
100
50
66
88
44
KXX-A12040 A
8