Samsung Galaxy Tab SCH-I800 User Manual page 81

Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for available Wi-Fi
connections, then displays them on screen.
From any screen, sweep your finger downward from the
1.
top to display the Notification Panel.
Touch Wi-Fi to turn Wi-Fi On. Your device automatically
2.
scans for available Wiress Access Points.
When the scan is complete, touch a Wi-Fi network to
3.
connect. If the Wi-Fi network is open, your device will
automatically connect. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
From a Home screen, press the Menu Key
1.
Wireless and network
Touch Wi-Fi to turn Wi-Fi On.
2.
Touch Add Wi-Fi network, then enter information about the
3.
network:
• Network SSID: Enter the name of the Wi-Fi Wireless Access Point.
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or hex key.
Note: Depending on the Security protocol used by the WAP, additional
network information may be required.
Touch Save to save the settings.
4.
Settings
Wi-Fi settings.
Connections 75