Flash / Left Button - Samsung D60 User Manual

Flash ( ) / Left button
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
Movie clip mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
Flash range
Normal
ISO
WIDE TELE
AUTO 0.8~3.0 0.8~2.5 0.3~0.8
[ Selecting the Auto flash ]
Macro Auto macro
WIDE TELE WIDE
0.4~0.8 0.3~3.0
INFORMATION
Using the flash frequently will reduce the life of the battery.
Under normal operating conditions the charging time for the flash is
normally within 5 seconds. If the battery is weak, the charging time will be
longer.
During the continuous shot, AEB, some scene modes (p.26) and movie clip
mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly
reflective.
When taking an image in poorly lit conditions with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the atmospheric dust. It is not camera malfuction.
(Unit : m)
TELE
0.4~2.5
25