Introduction Thank you for choosing Choicemmed infrared Thermometer (CFT-308). This thermometer is a high-quality product incorporating the latest technology and tested in accordance with international measurement. Please read these instructions carefully before using this product. Precautions Attentions • Use of this thermometer is not intended as a substitute for consultation with your physician.
Intended Use Infrared Thermometer is a reusable thermometer intended for the intermittent determination of human body temperature in a no touch mode using the center of the forehead as the measurement site on people of all ages. It can be used by consumers in the household environment and by healthcare provider.
The infrared thermometer is designed for all ages, adults, infant and elders. It not only supports for human, but is able to take room/object temperature. Two modes are easily switchable. BEST THERMOMETER FOR BABY 1 second fast measurement with instant reading, just take the temperature without wake your baby up. ...
Press and release power button to cycle through three age ranges. You may select: 36+months, 0-3 months, 3-36 months, the device will display as below: Note: The default age range is “36+months”. Measure Forehead Temperature Prepare for measurement: Follow these guidelines to take an accurate and reliable measurement. 1.
Fig. 2 Notes: • The measurements can be recorded and transmitted via Bluetooth (Bluetooth transmission is optional). The Bluetooth symbol will be lighted once the Bluetooth starts up, otherwise it will keep flashed. • The battery symbol indicates the remaining battery capacity. When voltage of the battery is low, the display flashes the low battery warning symbol .
Memory Search Short press power button + scan button, the device will be powered on and default to records. Short press scan button to alternate and check last ten measurements (M1-M10), shown as in Fig. Fig. 5 Notes: • Latest ten measurements of human temperatures can be memorized. •...
Power supply and environment must be maintained under manual specifications. Exempt and limitation: a) During the period of validity of the warranty, Choicemmed will repair and/or replace free of charge all the defected parts due to production reasons. Labor costs and personnel traveling...
Guidance and Manufacturer’s declaration - electromagnetic emission The CFT-308 Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of CFT-308 Infrared Thermometer should assure that it is used in such an environment.
Page 11
Guidance and Manufacturer’s declaration - electromagnetic immunity The CFT-308 Infrared Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the CFT-308 Infrared Thermometer should assure that it is used in such an environment.
Page 12
RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Infrared Thermometer (CFT-308) should be observed to verify normal operation. If abnormal performance is observed, additional measurements may be necessary, such as reorienting of the relocating the Infrared Thermometer (CFT-308).
Need help?
Do you have a question about the CFT-308 and is the answer not in the manual?
Questions and answers