Setting Up The Play Back Function Using The Lcd Monitor - Samsung DIGIMAX L85 User Manual

Remote control
- MENU/ OK button : When you press the MENU button, the play
mode menu will be displayed on the LCD
monitor. Pressing it again will return the LCD to
the initial display. When the menu is displayed
on the LCD monitor, the OK button is used for
confirming data that is changed by using the 5
function button.
- Up/ Down/ Left/ Right button : In play mode, you can select a still image or
movie clip by pressing the Left/ Right button. In
play mode, different parts of the enlarged image
can be viewed by pressing these buttons. In the
thumbnail mode, you can move to a desired
image by pressing these buttons.
- Play & Pause button : If a still image with a voice memo or a movie clip
is playing, pressing this button make the files
play back or pause.

Setting up the play back function using the LCD monitor

■ PLAY mode functions can be changed by using the LCD monitor. In the PLAY
mode, pressing the MENU button displays the menu on the LCD monitor. The
menus you can set up in Play mode are as follows. To capture an image after
setting up the play menu, press the PLAY mode button or shutter button.
Menu tab Main menu Sub menu
Interval
SLIDE
OSD
INFORMATION
OSD Off
Right 90˚
ROTATE
Horizontal
Secondary menu
Show Play/ Repeat Play
1, 3, 5, 10 sec
OFF
Effect
Full -
Basic -
-
-
Left 90˚ -
180˚ -
-
Vertical -
Page
p.49
p.50
p.51
《47》