Samsung DIGIMAX 401 User Manual page 18

Instructions on how to use the memory card
INFORMATION
If you open the memory card cover when the camera power is turned on, the power will
turn off automatically.
Don't remove the memory card when the camera status lamp(Green) is blinking as this
may cause damage to data in the memory card.
You can use an SD memory card and MMC(Multi Media Card).
Card
pins
Write protect
switch
Label
SD(Secure Digital) memory card
When using a 16MB internal memory, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance). These figures are
approximate as image capacities can be affected by variables such as subject matter.
Recorded image size
2304X1728 (2304)
2048X1536 (2048)
1600X1200 (1600)
1024X768 (1024)
640X480
18
Super fine
9
11
18
39
(640) 84
The SD memory card has a write protect
switch that prevents image files from being
deleted or formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected. By
sliding the switch to the top of the SD memory
card, the data protection will be canceled.
Slide the switch to the top of the SD memory
card before taking a picture.
Fine
19
23
35
76
170
Normal
29
35
55
106
213