QUICK SETUP GUIDE
AM/FM Amplified
Radio Antenna
NS-ANT20FM
This antenna is specifically designed for indoor AM/FM radio reception,
featuring a compact and stylish housing to complement your AM/FM
radio.
PACKAGE CONTENTS
Balun adapter
Antenna stand
Power adapter
Antenna
Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
FEATURES
• Designed specifically for receiving AM/FM radio broadcasts
• Compatible with HD Radio broadcasts
• High-gain amplifier maximizes receiving range and sound quality
• Weighted, non-slip base for easy placement
SETTING UP AND USING YOUR ANTENNA
Install this antenna near your AM/FM radio or receiver with an AM/FM
tuner.
1 Select a location to place your antenna. See "Tips for Better Reception"
for more information.
Note: This is an indoor antenna. Do not place it outside.
2 If your radio has a 75-Ohm FM connector, connect the antenna's
coaxial cable to your radio's 75-Ohm FM connector.
OR
If your radio has a 300-Ohm FM connector, connect the antenna's
coaxial cable to the balun adapter, then connect the other end of the
balun adapter to your radio's push-button or screw terminals.
3 Connect the antenna's AM cable to your radio's push-button or screw
terminal AM connector.
4 Connect the power adapter to the antenna's DC 12V input, then plug
the AC end into an AC outlet.
Note: Use only the supplied power adapter.
Antenna
Power adapter
Coaxial cable
AM cable
Coaxial cable
Balun adapter
Radio
Balun adapter
5 Attach the stand to your antenna, then place it on a stable surface.
6 Turn on the radio and begin tuning.
Antenna
Stand
Note: When you finish the installation, tune your radio to check the signal
strength and quality. If the quality is not good enough, move the antenna to get
the best reception.
Need help?
Do you have a question about the NS-ANT20FM and is the answer not in the manual?
Questions and answers