Using The Box; Maintenance And Repairs - schmelzer Air-Box Owner's Operating And Installation Manual

1.1.1.1

7 Using the box

Filling
Fill the Air box evenly and as centred as possible. Place the box on a level, load-bearing sur-
face.
Emptying
Move the Air box into a more upright position with the aid of a fork lift. Now the slide can be
opened from outside. The bulk goods now flow centrically out of it.
To reach the maximum space for bulk goods, the hopper is turned by 40°. In some cases it
could happen that the Air box may not be completely emptied. (depending on the bulk goods).
In this case eliminate the blockage from above with a suitable object (for example with a
broom).

8 Maintenance and repairs

During usage, especially when bulk goods with a floury percentage are filled in, blockages in
the ventilation hopper may occur. Pay regular attention to the cleanness of the perforation.
Clean the perforation with a broom if necessary.
Page 34 of 34