Troy-Bilt Flex 23A-1AXA766 Fast Start Manual

1
To rest the FLEX™ Power Base after unpacking
it from the shipping carton, and/or when no
attachment is present, a convenient Latch'n
Lock™ kickstand has been provided on the rear
of the unit. Simply deploy the Latch'n Lock™
kickstand to park the FLEX™ Power Base when no
attachment is present.
Remove any packaging material from the
upper handle.
2
Loosen the handle adjustment knobs (A)
and pivot the upper handle assembly
upwards (B) until it reaches the optimal
operating position based on the operator's
preference.
Note: The handles
can only be put into 3
positions.
A
B
A
© 2015 23A-1AXA
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Attachment
Control Safety
Lock
Attachment
Control Lever
Drive Control
Lever
On/Off Switch
Handle Adjustment Knob
Latch'n
Lock/
Kickstand
C
Tighten the handle adjustment knobs (C) to firmly
secure the upper handle and support tubes.
Note: The convenient handle adjustment knobs
(C) are available for the operator to simply make
a handle adjustment, based on preference and/or
application, quickly, and easily.
To put the handlebars in the stowed
position loosen the handle adjustment
knobs (A), and pivot the upper handle
assembly downwards (B) until it reaches the
bottom of it's pivot motion.
Lightly tighten the two handle adjustment
knobs (C) to secure the upper handle into
stowed position.
B
A
Need Help? Call 1-888-TO-HELP-U
3
C
4
A
778-13408