Advertisement
Quick Links
Linear Garage Door Opener
Integration Release Notes
For model GD00Z-5
Content
Preface...1
Introduction...1
Incompatible openers...12
Contact information...12
Last modified: 08/17/20
Preface
For information on Z-Wave and ClareHome, see
ClareHome.
Notes
• When installing Z-Wave devices, ensure that there is nothing inhibiting their
signal. Z-Wave relies on radio signals. Metal or thick walls may limit their
signal strength.
• We recommend having 2 or more repeating Z-Wave devices.
Introduction
The Linear GD00Z-5 Garage Door Opener Remote Transceiver provides
position-aware garage door integration to ClareHome via the Z-Wave network. It
is compatible with most automatic garage door openers connected to a sectional
garage door. Installers only need to pair (adding) the unit into the ClareHome
Z-Wave network, mount the unit, and then connect two wires.
Doc ID - 1042 • Rev 08
Installing Z-Wave with
1 / 12
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Clare Controls GD00Z-5
-
Page 1: Table Of Contents
• We recommend having 2 or more repeating Z-Wave devices. Introduction The Linear GD00Z-5 Garage Door Opener Remote Transceiver provides position-aware garage door integration to ClareHome via the Z-Wave network. It is compatible with most automatic garage door openers connected to a sectional garage door. -
Page 2: Installing Gd00Z-5 Devices
The GD00Z-5 provides both audible and visual warnings prior to remotely activating door movement. The GD00Z-5 ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports the open, closed, and motion indication status to the controller. - Page 3 2. Tap + Add Device. 3. Tap Add Devices. 4. Select the device category, Access. 5. Select the device type, Z-Wave Device - Access. Doc ID – 1042 • Rev 08 3 / 12...
- Page 4 6. Read through the displayed information, and then tap Add Z-Wave Device. 7. Read the Z-Wave information, and then tap Start Discovery Mode. 8. When prompted, press the pairing button on the Linear. Doc ID – 1042 • Rev 08 4 / 12...
- Page 5 9. Once paired in, the Edit Device page displays. Customize the device name and location as desired, tapping Save when done. Note: For scenes, notifications, schedules, and automations configuration, ClareHome App Guide (DOC ID 1750). To remove the garage door opener in the ClareHome app: 1.
- Page 6 2. Tap Access. 3. Tap the 3 dots next to the garage door opener, and then tap Remove. 4. Read through the displayed information, and then tap Start Removal Mode. 5. Use the manufacturer’s instructions for garage door removal. Doc ID – 1042 • Rev 08 6 / 12...
- Page 7 To add the garage door opener in FusionPro: 1. Click Accounts in the side menu. 2. Locate the desired account in the list, and then click View. The Account sub-menu is now available. 3. Click the Devices tab, and then click Add Devices. Doc ID –...
- Page 8 4. Select the device category (Access) and then the device type (Z-Wave Device – Access). 5. Click Add a Z-Wave Device, and then click Start Discovery Mode. A popup displays waiting for a notification from the device, pair the Z-Wave device according to the manufacturer’s instructions for each device.
- Page 9 6. Once the device is added, change the name and area as desired. 7. Once all desired changes are made, tap Save. To remove the garage door opener with FusionPro: 1. Click Accounts in the side menu. Doc ID – 1042 • Rev 08 9 / 12...
- Page 10 2. Locate the desired account in the list, and then click View. The Account sub-menu is now available. 3. Click the Devices tab, and then click Remove Z-Wave. 4. Click Start Removal Mode. 5. Use the manufacturer’s instructions for garage door removal. Doc ID –...
-
Page 11: Installing The Gd00Z-5 Transceiver And Tilt Sensor
Installing the GD00Z-5 transceiver and tilt sensor To install the GD00Z-5 transceiver and tilt sensor: 1. Install the GD00Z-5 transceiver and tilt sensor according to the manufacturer’s instructions. 2. Next, follow the manufacturer’s system operations to synchronize the system. 3. Access your ClareHome app and verify that the Linear garage door opener is now available in the Device tab. -
Page 12: Incompatible Openers
Incompatible openers The GD00Z-5 is compatible with most sectional garage door openers manufactured after 1993; however, a few are known to be incompatible. The following lists the incompatible openers. This is not intended to be a complete list, but identifies some recent models commonly found in the retail marketplace.
Need help?
Do you have a question about the GD00Z-5 and is the answer not in the manual?
Questions and answers