Phonic USBR-1 User Manual page 6

Changing to Recording Bit-rate
Push and hold the Record button for 5 to 6 seconds to enter the
Bit-rate menu. When you do so, the two available bit-rate will
appear on screen: 128 kbps and 192 kbps. Push the record button
again to swap the bit-rate.
Deleting a File
Whenever a file is highlighted users can push and hold the Stop/
Menu button for 4 seconds to access the menu. Use the cue button
to scroll down to "DELETE" and push the Play/Pause button to
accept. Press the Play/Pause button again to confirm deletion or
the Stop/Menu button to decline.
Installation of Safari CD/USB or USBR-1
We recommend that an authorized Phonic repair facility or dealer/
distributor carryout the steps below:
1. Remove all power cables and turn the Safari off.
2. Unscrew the protective faceplate on the Safari and remove it.
3. Find the cables taped just within the hole left after removing
the faceplate
4. Connect cables to the connectors at the rear of the optional
player
5. Insert the player into the Safari and screw into place using the
screws removed from the protective faceplate
2
USBR-1
Specifications
Playback file support
Playback bit-rate
Frequency response
Recording format
Recording bit-rate
Recording sample rate
USBR-1
MP3 / WMA
8 ~ 384 kbps
20Hz ~ 20,000Hz
MP3
128 kbp/s , 192 kbp/s
44.1 kHz