Wemo Insight Smart Plug Setting Up page 2


Make sure that your iOS or Android device and the Wemo device is
within the range of the router.

Make sure that the Wemo device is plugged in to a power outlet. If it
is already properly plugged in, try rebooting the Wemo device.

Press the Reset button and start all over.

Some Android versions have an option enabled called Smart
Network Switch or sometimes called Mobile Network
Switch and Auto-switch to mobile network. This option allows
your Android device to switch between saved Wi-Fi and data
connections on its own. With this option enabled, your smart device
may switch back to your saved Wi-Fi or data connections while you
are performing the setup on your Wemo, causing the setup to
fail. Before setting up your Wemo, it is recommended that you
disable this feature. For more information, click here.
Step 4: Launch the
Wi-Fi Settings option is checked so the Wemo App can save your Wi-Fi settings.
NOTE: The Wemo Motion has two parts. Make sure to securely connect the sensor
to the plug in. For simplicity, plug in and set up your Wemo devices one at a time.
It will then notify you that it's connected to your Wemo device and will try to connect to
your router's main Wi-Fi.
When prompted, select your router's main Wi-Fi.
Step 5:
App on your mobile device. Make sure that the Remember