Advertisement
Quick Links
Advertisement
Summary of Contents for DEVAISE Smart Lock
- Page 1 Smart Lock Instruction...
- Page 2 USB-KEY Interface Low Voltage Indicator Light Touch pane Knob Battery box Unlocking Indicator Light Locking Indicator Light How to change the button battery Put the needle into this hole vertically. Press the needle to make the battery holder come out. Place the cathode side of the button battery inward of the battery holder the put the battery holder into the lock body.
- Page 3 2.Turn on public mode, set temporary password Turn on public mode Input current management password + OK, buzzer gives out a long di..sound, unlocking indicator light is on. Press OK at least 2 seconds, unlocking indicator light if twinkle, press OK again. Input “4,4”...
- Page 4 Features 1. Decode:When password been forgotten,you can get the decode number by providing the code on the lock body,or use USB-KEY to the distributor to decode. The password will be changed back to the original management password “4321”, and user password “1234”. 2.
Need help?
Do you have a question about the Smart Lock and is the answer not in the manual?
Questions and answers
How do I erase the default password so it won't let anyone in by knowing the standard default password?
To erase the default password on the DEVAISE Smart Lock, you need to change it by following these steps:
1. Input the current user password “1234+OK” or management password “4321+OK”. A long beep will sound, and the unlocking indicator light will turn on.
2. Press OK for at least 2 seconds until the indicator light twinkles.
3. Enter a new password (4–15 digits), for example “123123”.
4. Press OK. A long beep confirms the password has been changed.
Note: The management password cannot be the same as the user password.
This answer is automatically generated
Dear Support! I forget the code. I can not open the battery box to check... I can not open the cabinet. Please help! Thanks!