3. CIF/NMEA Data Signal Cable (CO-SPEVV-SB-C 0.2X5P)
Anticorrosive
Sheath
4. Other Cables
All other cables are terminated at a terminal strip.
1) Processing the armor
<Cable passed through cable clamp>
Locate the armor in the cable clamp.
<Cable passed through cable gland>
Solder a vinyl wire w/crimp-on lug to the armor and fasten it to the earth terminal.
Solder here.
Armor
Vinyl sheath
Figure 5-4 Cable fabrication
Figure 5-5 Cable fabrication
Bare wire
Vinyl wire
Figure 5-6 Cable fabrication
5.2 Cable Fabrication
Screw
Set Screw
Connector shell
Fasten to earth terminal.
Pin
26