Page 1
Patio Heaters Assembly Photo Guide Models: SH16310N, SH16320N, SH16330N Please read in conjunction with the printed manual that came with the product Help line: 0333 220 6050 v1.0 Patio_Heaters_Assy.indd 1 03/05/2019 11:35...
Page 2
SH16310N - COLUMN PATIO HEATER 1. Lower body 2. Upper body 3. Base 4. Base cover 5. Cord grip 6. Screws for joint boards 7. Screws & washers for base 8. Joint boards 9. Allen key You will also need a cross head screw driver. Assembly is much easier with two people and reduces the risk of damaging the product.
Page 3
SH16310N - COLUMN PATIO HEATER Thread the plug and cable from the upper body (2) through the channel in the lower body (1) Make sure it goes all the way through. Slide the upper body (2) on to the lower body (1) Patio_Heaters_Assy.indd 3 03/05/2019 11:35...
Page 4
SH16310N - COLUMN PATIO HEATER Fit the joint boards and secure with the screws (6) using the allen key provided (9) Turn the unit upside down (put some cloth down to prevent scratches). Put the base (3) inside the base cover (4) and thread the plug and cord through the hole in the middle...
Page 5
SH16310N - COLUMN PATIO HEATER Fasten the base to the main unit using the screws & wash- ers (7) Fasten the cord grip (5). Make sure the lip faces upwards Refer to the manual that came with the product for operation guide Patio_Heaters_Assy.indd 5 03/05/2019 11:35...
Page 6
SH16320N - BAR TABLE PATIO HEATER 1. Main body 2. Base cover 3. Base 4. Table top 5. Foot bracket 6. Allen keys - 1 large + 1 small 7. Screws & washers for base 8. Long screws + steel tubes 9.
Page 7
SH16320N - BAR TABLE PATIO HEATER Turn the main body (1) upside down (put a cloth down to prevent scratches) Fit the base cover and thread the plug and cord through the hole in the middle. Fit the base inside the base cover (2) and align the holes ready for the screws and...
Page 8
SH16320N - BAR TABLE PATIO HEATER Fit the screws and washers. Leave them slightly loose for the moment. This allows a little movement in the base for the next part... Get someone to hold the bar base (5) in position. Thread the long screws though the holes in to the steel...
Page 9
SH16320N - BAR TABLE PATIO HEATER Once all 3 of the long screws are fitted, tighten them all (using the larger allen key) Finally tighten the base screws as well (small allen key) Fit the cable to the cable tie and fit the castors Patio_Heaters_Assy.indd 9 03/05/2019 11:35...
Page 10
SH16320N - BAR TABLE PATIO HEATER Turn the unit the right way up again & offer up the table top. The holes must line up as shown. The bump (2) must align with the hole (1) This MUST be a 2 person task or you risk breaking the table top.
Page 11
SH16330N - PORTABLE PATIO HEATER 1. Main body 2. Base cover 3. Base 4. Cord grip & screws 5. Allen key 6. Deco board 7. Base screws & washers You will also need a cross head screw driver. Assembly is much easier with two people and reduces the risk of damaging the product.
Page 12
SH16330N - PORTABLE PATIO HEATER Fit the deco boards (6) as shown Put the base (3) inside the base cover (2) and thread the plugs and cord through the hole in the middle. Make sure the 2 mounting holes are aligned.
Page 13
SH16330N - PORTABLE PATIO HEATER Fit the base assem- bly to the main body (1) and tighten the screws and washers (7) as shown. Fit the cord grip (4) ensuring the lip faces upward. Refer to the manual that came with the product for operation guide Patio_Heaters_Assy.indd 13 03/05/2019 11:35...