Advertisement
Cup size output control knob
Power button (with indicator)
Stop button
Removable shelf
BEFORE USING YOUR WATER DISPENSER
Remove all packaging. If you are using the water dispenser for the first time, it is
recommended that you should clean it before use by boiling two cups of water.
1. Place the water dispenser on a stable surface
2. Press the Lid Release Button
3. Pour 2 cups of water into the tank, ensuring the lid is firmly closed after filling
4. Place a cup under the Spout - we recommend minimum 250ml size
5. Set the Cup Size Output to the middle setting
6. Connect the Water dispenser to the mains supply
7. Press the Power button
8. You will hear the selected amount of water start to boil. The process takes
between 40-55 seconds
9. Once the water has boiled it will be dispensed into the cup
10. You can press the Stop Button at any time to stop the boiling or dispensing
process
11. Discard the water and repeat the process until the tank is empty. This will clean
out any residue in the Water Dispenser left over from factory production or
testing processes.
You can refill the tank by lifting the water dispenser from its base and fill from the
tap. Or you can fill with a jug. Refer to the Water Level Indicator at the back and take
care not to overfill past the MAX level.
HOW TO USE
Spout
5
Lid release button
Lid
Handle
Water gauge
Body
Power base
Drip tray
Advertisement
