Advertisement

Interiors, wall mounting

Ref. No. 9135351E
Box for wall mounting
with frame for 1 module
Size: 125 x 235 x 46 mm
Wall cut: 110 x 220 x 50 ± 5 mm
Ref. No. 9135352E
Box for wall mounting
with frame for 2 modules
Size: 225 x 235 x 46 mm
Wall cut: 210 x 220 x 50 ± 5
mm
Cut sizes for sets of 3 – 8 modules
module count
Box for 2 modules, number of pieces
Box for 1 module, number of pieces
Wall, without roof, cut width, mm
Wall, with roof, cut width, mm
Gypsum plasterboard, without roof, total width of cuts, mm
Gypsum plasterboard, with roof, total width of cuts, mm
Notice: Do not fasten the boxes with plaster – they are designed for dry mounting
Outdoor spaces*, wall mounting
Ref. No. 9135361E
Box for wall mounting with roof
for 1 module
Roof size (width x height x depth):
129 x 240 x 41 mm
Wall cut: 110 x 220 x 50 ± 5 mm
Ref. No. 9135362E
Box for wall mounting with roof
for 2 modules
Roof size (width x height x depth):
229 x 240 x 41 mm
Wall cut: 210 x 220 x 50 ± 5 mm
3 m.
1
1
335
339
330
334
*) Outdoor spaces =
locations where the product is
exposed to rain or to water
running down the wall (e.g.
fence, outer wall). Mounting a
roof is obligatory in outdoor
spaces, unless the protection
against rain is provided for in
another way. Besides the roofs
presented herein, it is possible
to use roofs ref. no. 9135331E
and 9135332E
4 m.
5 m.
6 m.
2
2
3
-
1
-
435
560
660
439
568
668
430
555
655
434
563
663
Wall mounting
with roof
7 m.
8 m.
3
4
1
-
785
885
797
897
780
880
792
892

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9135351E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for 2N 9135351E

  • Page 1 Besides the roofs presented herein, it is possible to use roofs ref. no. 9135331E and 9135332E Ref. No. 9135361E Ref. No. 9135351E Box for wall mounting with roof Box for wall mounting for 1 module with frame for 1 module...
  • Page 2 Mounting procedure Cut a hole using the template on the reverse side of this instruction. If you work carefully and do not exceed the tolerance of 5 mm, the frame will fully roof the edges of the cut and there will be no need to fill it with plaster. As it is possible to cut a more perfect hole in the plasterboard, it is advisable to make it 5 mm smaller: 105 (205) x 215 mm.
  • Page 3 Helios IP cable passage hole properly to avoid moisture in-leak and damage to electronics ® due to condensation. Make sure that the wires inside 2N Helios IP are not squeezed and insert the plastic top cover (a transparent plastic mould) ®...
  • Page 4 WRONG Gap between plastic cover and loudspeaker seal - water may leak in and damage electronics If the loudspeaker support is in a wrong position, the plastic cover may catch the support brim (see the arrow) and, if treated roughly, lead to component deformations.

This manual is also suitable for:

9135361e9135352e9135362e

Table of Contents