Advertisement
5. OPERATION
5.1.
Remove bolt (fig.4.B) from handle (fig.4.A).
5.2.
Select the correct adaptor (fig.4.C), one which is slightly smaller than the diameter of the seal/bearing race, and position it correctly on the
handle. Secure using the bolt.
5.3.
Place the seal/bearing race (fig.4.E or F) in the mouth of the housing (fig.4.D), place adaptor against it and tap the driver handle to force
it into place (fig.5).
fig.4
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
fig.1
fig.5
Environmental Protection
fluids according to local regulation
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.2
s.
01284 757500
01284 703534
fig.3
www.sealey.co.uk
sales@sealey.co.uk
VS703.V6
Issue: 1 - 16/03/17
Advertisement
