Music in Every Room Contralto User & Installation Manual

Bluetooth soundbar

Advertisement

Congratulations on purchasing the Contralto Bluetooth Soundbar.
It's designed primarily for fitting in a kitchen plinth, but is equally happy in other furniture.
 Mounted vertically in a 150mm kitchen spacer unit (base or wall)
 Mounted in the rear of a wall unit playing down at the work surface
 Bathroom vanity cabinet (Plinth, or mounted under an open unit)
 Bedroom or living room furniture.
WHAT'S IN THE BOX
1
Soundbar
2
Fixing screws (6)
3
Power supply 240 / 15v
4
Bolt for rear height support
5
Remote control
6
Batteries for remote control
7
Installation cutout template

SAFETY

The Soundbar is designed to be installed in furniture.
It is suitable for indoor use only.
If installed in a bathroom then it must be in Zone 2 or outside zone. It must not be installed in
Zone 0 or Zone 1. The bathroom should be ventilated.
It is not suitable for saunas, steam rooms or shower cubicles.

UNPACKING

Carefully remove the soundbar from its packing box and support foam.
The front grill is pressed onto studs, slip your fingers behind the plastic trim and gently ease
free from the case.
complete with
removeable front grill
Steel fixing trim (attached to the soundbar)
Packed in power supply box
Fits UK 3 pin socket
Packed in power supply box
Packed in power supply box

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Contralto and is the answer not in the manual?

Questions and answers

Summary of Contents for Music in Every Room Contralto

  • Page 1 Congratulations on purchasing the Contralto Bluetooth Soundbar. It’s designed primarily for fitting in a kitchen plinth, but is equally happy in other furniture.  Mounted vertically in a 150mm kitchen spacer unit (base or wall)  Mounted in the rear of a wall unit playing down at the work surface ...
  • Page 2 INSTALLATION A template is enclosed for the exact cut out dimension. 445 x 105mm To fit in a kitchen plinth. 1. The Soundbar is more easily fitted during installation of the kitchen. Nevertheless, it can also be a straightforward retrofit. 2.
  • Page 3 9. A rear support/leveling bolt is supplied. Screw into the base of the soundbar. Place the plinth into position and adjust the bolt to suit the level of floor under the kitchen unit. Alternatively, you may wish to support the rear with wooden packing and dispense with the leveling bolt.
  • Page 4 In AUX mode the skip tack forward, pause and skip track back do not operate. (buttons row 3) CONTACT This unit is designed and manufactured by Music in every room ltd. If you have questions on installation or use, then please contact us. MUSIC IN EVERY ROOM LTD Guiseley, LEEDS, LS20 8BX 01943 870 395 www.musicineveryroom.co.uk...

Table of Contents