Adjusting The Osd Settings; Adjusting The Volume - Acer XF240YU User Manual

Adjusting the OSD settings

NOTE: The following content is for general reference only. Actual product specifications may vary.
The OSD (on-screen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can
use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to the following
pages:
Main page
Turning Mode on or off
Open the Mode control and turn Mode on or off using the arrows (OFF/ON), and select which user-defined profile to use (please
see the OSD section for more information).
Adjusting the Brightness setting
Open the Brightness control and select your preferred brightness setting using the arrows. When you are done, use
one level.

Adjusting the Volume

Open the Volume control and set the volume using the arrows. When you are done, use
1. Mode
2. Brightness
3. Volume
4. Input selection
5. Function menu
to go back
to go back one level.