2.
SPECIFICATION & ASSEMBLY
Oil-filled radiators suitable for office, home, showroom and workshop use.
Manufactured to rigorous safety standards and fitted with a BS approved plug.
Features full thermostatic heat control that cuts power to the heater elements
when pre-set temperature is attained.
Elements designed to maximise area of the heated surface in order to transfer
more heat to the atmosphere. Fitted with castors for added mobility.
SPECIFICATIONS:
Model
Input/Output
RD1500.V5
230V 13A 1500W
RD2500.V5
230V 13A 2500W
ASSEMBLY:
Mount the castor wheels between the first and second element of each end of the
radiator. Tighten the wing nuts on the metal loops and your heater is ready to use.
3.
INSTRUCTIONS FOR USE
3.1.
Unwrap the mains lead and plug it into the power supply.
3.2.
Turn the thermostat control to the highest setting.
3.3.
Choose the required heat output by selecting the appropriate switch which will light up when
pressed.
3.4.
Low setting: . . . . .Select switch with one black bar below it.
Medium setting: . .Select switch with two black bars below it. Set switch with one black bar to off.
High setting: . . . .Select both switches.
3.5.
Once the required room temperature has been achieved turn the thermostat down until the light
on the selected heat setting switch goes out. The heater will then keep the surrounding air at the
set temperature by switching on and off at intervals. You may reset the thermostat at any time.
3.6.
To switch the unit off, turn the heat selecting switches off and unplug from the mains. Allow the
unit to cool before handling or storage.
3.7.
Safety cut-out. The heater is fitted with a thermostatic safety cut-out which will automatically turn
the heater off should it be placed in circumstances that cause overheating or malfunction. Should
this happen, switch the heater off and disconnect it from the mains. Allow the heater to cool
before handling. Do not use the heater again until the cause has been identified and remedied. If
necessary return the heater to your Sealey dealer for servicing.
3.8.
When used for the first time set the heater to maximum power for two hours. Ventilate the room
well to eliminate the "new" smell which may emanate from the heater.
4.
MAINTENANCE
! WARNING! Disconnect the heater from the mains power, before servicing or performing any maintenance, which must only be carried out
by an authorised service agent with the exception of the following.
4.1.
Dust the radiator (when cold) with a dry cloth.
4.2.
Do not use a strong abrasive to clean the radiator.
4.3.
When storing the heater in the summer, use the original shipping box and store in a safe, dry location.
Note:
Report any oil leakage immediately to an authorised service agent.
OIL FILLED RADIATOR
Model RD1500.V5, RD2500.V5
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof
of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full
name and address, including postcode.
No of Elements
7
11
Declaration of Conformity
are in conformity with the following standards and directives
The construction file for these products are held by the Manufacturer and may be inspected on request
by contacting Jack Sealey Ltd.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
We, the sole importer into the UK, declare that the products listed here
1st June 2007
01284 757500
01284 703534
HEAT SETTING SWITCHES
THERMOSTAT
www.sealey.co.uk
Web
sales@sealey.co.uk
email
RD1500.V5, RD2500.V5 - 1 - 010607